Thred

Suspense account in Xero: how to create, use, clear and reconcile it, with a worked example

Manoj Tutika · Published 16 November 2026 · Last checked 16 November 2026

Working on this yourself? Talk to Mark, our co-founder. We’re here to solve it with you.

Book a demo

What is a suspense account in Xero?

A suspense account is a temporary home for a bank line you cannot code yet: a receipt with no reference, a card payment to a merchant nobody recognises, a transfer that might be a loan. Posting it to suspense lets you reconcile the bank account today and keep the bank balance in Xero equal to the bank, without guessing an expense or income account. The rule is simple: every item in suspense has an owner, a question and a date, and the balance goes back to zero before the books are closed.

Xero does not need a special feature for this. A suspense account is an ordinary account in your chart of accounts that you add yourself and agree to clear.

How do you create a suspense account in Xero?

  1. In the Accounting menu, select Chart of accounts.
  2. Click Add Account.
  3. Choose the account type. Most practices use Current Asset or Current Liability so the balance shows on the balance sheet, never in the profit and loss. Do not choose Bank.
  4. Give it a code at the end of your range, such as 9999, and the name Suspense, so nobody codes to it by accident.
  5. Set the default tax rate to a no-VAT rate. VAT belongs on the final entry, when you know what the line was.
  6. Select Enable payments to this account. This lets you pay or receive against invoices and bills from the suspense account later, which is the cleanest way to clear most items.
  7. Click Save.

You need the administrator role to add accounts. Xero recommends no more than 699 accounts in total, so one suspense account per organisation is enough.

How do you post an unknown bank line to suspense?

On the Reconcile tab, open the line, go to the Create tab, enter the contact if you know it, choose the Suspense account in the What field and write what you know in the Why field, for example "Receipt £1,250 no ref, asked sales 3 Nov". Then use the Discuss tab to put the question to the person who can answer it. Click OK to reconcile.

Do not set up a bank rule that sends a whole category of lines to suspense. That turns a temporary holding account into a permanent bin. Rules are for lines you already understand; see Xero bank rules.

How do you clear the suspense account?

How you clear an item depends on what it turns out to be.

How to clear a suspense item in Xero
What the line turns out to beHow to clear itWhy this way
Customer payment for one or more invoicesRecord a payment on each invoice, paid into the Suspense accountAccounts Receivable is a system account and cannot take a manual journal
Payment of a supplier bill already in XeroRecord a payment on the bill, paid from the Suspense accountSame reason for Accounts Payable, and the bill shows as paid
Expense or income with no document in XeroManual journal from Suspense to the right account, with VAT where you hold evidenceThe cost lands in the right period and account
Transfer between your own accountsUnreconcile the line and reconcile it again as a transferBoth bank accounts must show the movement
Duplicate or bank errorRaise it with the bank, then reverse once correctedIt is not a business transaction

To post a manual journal, go to the Reporting menu, select All reports, open the Journal Report and click Add new journal. Xero lists Accounts Receivable and Accounts Payable among the system accounts that do not accept manual journals, which is why invoice and bill items are cleared with payments instead.

How do you reconcile the suspense account at month end?

Run the account transactions for the Suspense account up to the last day of the month and treat it like a balance sheet reconciliation.

  1. List every open item with its date, amount, the question asked and who owns it.
  2. Clear everything you now have an answer for, using the table above.
  3. Chase what is left. Anything older than 30 days goes to the finance manager; anything older than 60 days needs a decision, not another email.
  4. Before you set the lock date, the balance should be zero. If it is not, write down what remains and why, so the reviewer or auditor sees a list, not a mystery.

This review belongs in the Xero month-end close, right after the bank reconciliation.

What does a worked example look like?

On 31 October the Suspense account in a UK company's Xero holds three items.

Suspense account at 31 October
DateBank linePosted to suspense asEffect on suspense
3 Oct£1,250.00 received, no referenceReceive moneyCredit £1,250.00
12 Oct£3,600.00 paid to Brightline LogisticsSpend moneyDebit £3,600.00
27 Oct£84.00 card payment to an online software shopSpend moneyDebit £84.00
BalanceDebit £2,434.00

The answers arrive in the first week of November.

  • The £1,250.00 was a customer paying INV-1041 for £750.00 and INV-1043 for £500.00 in one go. Record a payment on each invoice dated 3 October, paid into Suspense. Suspense is debited £1,250.00 and the two invoices show as paid.
  • The £3,600.00 paid bill BL-2231 from Brightline Logistics, which was already approved in Xero. Record a payment on the bill dated 12 October, paid from Suspense. Suspense is credited £3,600.00.
  • The £84.00 was a design tool subscription bought by the marketing lead, and the receipt shows £70.00 plus £14.00 VAT. Post a manual journal dated 27 October: debit Software £70.00, debit VAT £14.00 through the 20% rate, credit Suspense £84.00. HMRC lets you reclaim input VAT only when you hold valid evidence of the supply, so without the receipt the whole £84.00 goes to Software.

After these three entries the Suspense balance is £0.00, every invoice and bill shows its real status and October's costs sit in October.

Why does a suspense balance matter?

A balance left in suspense means a cost or a sale is missing from the profit and loss, VAT may be wrong on the return, and a customer may be getting a reminder for an invoice they already paid. At year end, the accountant will ask about every pound in it. A suspense account is a tool for speed during the month, not a place to park problems; see the suspense account for the short definition.

What do Thred's agents do with suspense items in Xero?

Thred's agents keep the suspense account close to zero all month, not just on the last day. Thred works on the Xero organisation you already have: the agent reads it through the Xero API and creates and updates records such as invoices, bills, payments and journals, with every write shown to you for approval first.

The Bookkeeper looks at every line that lands in suspense, searches the open invoices and bills, the supplier history and the documents it has, and proposes the clearing entry with its evidence. The Collector matches unreferenced customer receipts to the invoices they pay, so nobody gets chased for money already received. The Payer ties outgoing payments to their bills. The Connector finds the missing context in email and your connected tools, such as the receipt for the £84.00. The Accountant checks the VAT on every clearing journal, The Treasurer keeps cash and transfers straight, The Analyst tells you what an uncleared balance does to the month's result, and The CFO sees the whole close. You answer the few questions only a person can.

On Exact Online, Thred goes further today with two-way sync and the scheduled Bookkeeping Quality agent that scans for suspense balances. See Thred Layer or book a demo.

Frequently asked questions

How do I create a suspense account in Xero?

In the Accounting menu, select Chart of accounts, click Add Account, choose Current Asset or Current Liability as the type, name it Suspense with a code such as 9999, set a no-VAT default rate, tick Enable payments to this account and save.

How do I find the suspense account in Xero?

Open Chart of accounts from the Accounting menu and search for Suspense or the code you gave it. Click the year-to-date balance to see every transaction in it.

How do I clear a suspense account in Xero?

For customer receipts and supplier payments, record a payment on the invoice or bill using the suspense account as the payment account. For anything else, post a manual journal from suspense to the correct account. Move transfers by redoing the reconciliation as a transfer.

What type of account should a suspense account be in Xero?

A balance sheet type, usually Current Asset or Current Liability, so it never affects profit. It must not be a Bank account. Agree the type with your accountant and keep it the same every year.

How do I reconcile a suspense account in Xero?

At month end, run the account transactions for the suspense account, list each open item with its owner, clear what has been answered and escalate the rest. The balance should be zero before you set the lock date.

Why can't I journal from suspense to Accounts Receivable?

Accounts Receivable and Accounts Payable are system accounts in Xero and do not accept manual journals. Clear those items by recording a payment on the invoice or bill from the suspense account.

Is a suspense account bad practice?

No, as long as it is temporary. It is better than guessing an expense account. It becomes a problem when items sit there past month end or a bank rule sends lines to it automatically.

Sources

  1. Xero Central, Add, edit or delete an account
  2. Xero Central, Enable payments to an account
  3. Xero Central, Locked and system accounts in your chart of accounts
  4. Xero Central, Add, import and post manual journals
  5. Xero Central, Reconcile your bank account
  6. HMRC, VAT guide (VAT Notice 700), evidence to reclaim input tax

Read next

Where Thred comes in

Thred Layer

Finance agents running on top of your existing ledger. You set the rules, approve the work and handle the exceptions. No migration.

Finance, handled.

Book a demo, or request a callback and we will call you.

Book a demo